Rcbs Reloading
Posted November 13, 2011
By admin
Rcbs Reloading
Jim Scoutten RCBS Single Stage Reloading
Rcbs Reloading
|
|
RCBS 99903 Handbook of Shotshell Reloading $41.08 The RCBS Handbook of Shotshell Reloading is a must have manual for the shotshell reloader. This handbook is ideal for both beginning and advanced shotshell reloaders. The manual features more than 2 000 reloading recipes and other features such as; the color identification guides for various hulls and wads reference notes and reloading data featuring RCBS presses. The manual includes complete reloading coverage from safety and reloading tips to load data for the newest steel bismuth and other nontoxic loads. Published in 2008. 284 pages Softcover. A full chapter on reloading safety. Color identification photographs of both external and sectioned views of various hulls available today. Color identification photographs of plastic wad columns. Complete chapter of reference notes give actual specifications for hulls shown in the section photographs. Complete chapter devoted to care cleaning and fun with a shotgun. Tear out safety wall chart. Cost to reload chart. Reference section showing parts and drawings of RCBS Shotshell presses. |
|
|
RCBS 09452 Universal Reloading Tray 50Round Plastic Green $26.14 The RCBS Universal Reloading Tray is a great tray for any reloading bench. The doublesided design has 25 holes on each side for a variety of different calibers. Material: Plastic. Notes: Doublesided. Fits: Fits most calibers from 17 to 48 including WSM WSSM and Ultra Mag cartridges. |
|
|
RCBS 09045 RS5 Reloading Press Starter Kit $446.17 Reloader Special5 Press featuring a more comfortable ball handle and a primer arm that lets you prime cases at the same time you resize. (item 9285 contains press and primer arm only). The starter kit item 9045 has everything you need to get started reloading rifle and pistol cartridges and is easily upgraded. The kit includes reloader special 5 press 505 scale case loading block case lube kit primer tray2 powder funnel deburring tool and Speer reloading manual. Type: Reloading Press Kit. Material: Cast Iron. Thread Size: 1 1/4 x 12 (Shotshell) 7/8 x 14. |
|
|
RCBS 09515 Speer Reloading Manual 14 $48.1 The Speer Reloading Manual #14 is an indispensable tool for any reloader. Many reloaders consider the Speer manual to be The Bible of Reloading and it is packed full of howto information charts illustrations photographs and history. There are over 9000 powder loads bullet data detailed ballistics tables bullet energy and velocity tables a special techniques sections problems solving section and much more. Pages: 1149. Edition: #14. Cover: Hardcover. Publisher: ATK/Speer. Published: 2007. Editor: Allan Jones. |
|
|
RCBS 09453 Universal Reloading Tray 40Round Plastic Green $23.61 The RCBS Universal Reloading Tray is a solid steady plastic platform that holds 40 cases at a time to streamline powder charging and inspection. Stepped holes minimize case tipping to reduce powder spillage. Fits most rifle and pistol cases. This block actually has 80 holes in it. 40 holes are marked #1 and 40 holes are marked #2 these holes alternated so there is space inbetween each case when it is in the block. Material: Plastic. Notes: Singlesided. Fits: #1 Hole fits cases from 3006 Springfield to 300 Winchester Magnum #2 Hole fits cases from 222 Remington to 3030 Winchester. |
|
|
RCBS 09440 Rcbs Bullet Puller Less Collet $38.84 The RCBS collet bullet puller is designed to easily pull jacketed bullets without damage. It utilizes standard 7/8 14 threads and may be used in any single stage reloading press. Collets sold separately. Not for use with nonjacketed bullets. Type: Collet Bullet Puller. Function: Pull bullets from cases. Material: Steel. Notes: Not for use with lead bullets. |
|
|
RCBS 88901 Turret Press $348.83 The RCBS Turret Press features a rugged cast iron frame toggle block and turret head. The sixstation turret head allows many combinations in the mounting sequence of dies and powder measure and even permits two or more calibers to be set up at the same time. Turret head held in place by one bolt for quick easy changeovers. Turret pin and ball handle assembly can be positioned for right or lefthand use. Primer plugs and sleeves are supplied for seating large and small primers. Dies and shellholder sold separately. Press Type: Turret Press. Auto Index: No. Number of Stations: 6. Frame Material: Cast Iron. Frame Design: CFrame. Frame Offset: None. Handle Location: Bottom Right or Left Hand. Die Size Accepted: Standard 7/8 14 Threaded Die. Die Bushing Accepted: No uses quick change turret head (1 included others available separately item# 395826). Spent Primer Collection System: Included. Ram Stroke: 4 . Priming Feature: Automatic Priming system included with primer tube primer plugs and sleeves for large and small primers and a spent primer catcher included. Number of Mounting Holes: 2 RCBS recommends using 3/8 bolts to mount to your reloading press to your reloading bench. Mounting Hardware Included: No. |
|
|
RCBS 09495 Primer Pocket Swager Combo $51.81 The RCBS Primer Pocket Swager Combo quickly removes primer pocket crimp from military cases. Unlike reaming the Pocket Swager Kit forms a perfectly round pocket that is the correct dimensions for American boxertype primers. Combo comes with swaging heads for both large and small primer pockets. Uses RCBS removable shellholders (sold separately) Not for use on progressive presses. Fits: Single stage and turret presses. Function: Removes primer pocket crimps from military cases. Material: Steel. Kit Contains:. 2 Swager rods: (Smallest is for 223 only). 1 Case stripper. 1 Large and 1 Small swager head (for primer pockets). 1 Swager die body with locking ring that has standard 7/8 14 threads for use with standard single stage presses. Notes:. This is a press mounted system for removing the military crimp from cases. If you are using the RCBS Big Max press you will need the optional Case Stripper for the Big Max Press. (Available only through RCBS part number 09489). If you are using the RCBS Model A2 Press you will need the optional Case Stripper Washer for the A2 Press. (Available only through RCBS part number 09488). Please note that this combo is not adaptable for use with progressive reloading tools. |
|
|
RCBS 09580 Auto Primer Feeder Combo $45.47 The RCBS Auto Primer Feeder helps to speed up the reloading process while at the same time curbing misfires and helping to prevent primer contamination from oily fingers. Primer Capacity: 100. Accessories: Large and Small primer tube. Notes:. Drops primers one at a time into the Primer Plug and sleeve. Nylon primer pickup keeps primers from falling out. For use with Rock Chucker II JR and Reloader Special Presses. Does not work with Rock Chucker Supreme or Partner Presses. |
|
|
RCBS 09358 Rock Chucker Supreme Press Auto Priming Unit $61.76 The RCBS Rock Chucker Supreme Single Stage Press is a great press that is designed to turn out precision reloaded ammunition. To increase the efficiency of the Rock Chucker Supreme press RCBS developed the Auto Priming Unit. This tube fed priming system helps to speed up the single stage reloading process and ensure that primers do not get contaminated by oily fingers. Each tube will hold up to 100 primers and the reloader is protected by accidental discharge with the included safety shield. Fits: RCBS Rock Chucker Supreme. Function: Automatic Priming Unit. Material: Steel and Aluminum. Notes: Push Bar Operation. |
|
|
RCBS 09069 Model 502 Magnetic Powder Scale 505 Grain Capacity $117.26 The RCBS Model 502 is a great scale for any reloading bench. The scale will weigh up to 505 grains which is more than sufficient for many reloading tasks. The magnetic dampening helps to ensure that the scale is quick and accurate. Capacity: 505 Grains. Material: Die cast metal base aluminum pan. Units: Grains (Features a ouncetograin conversion table on the base). Accuracy: +/ 0.1 Grains. Accessories: Aluminum Pan. Features: Magnetic Dampening Two poise design. |
|
|
RCBS 09071 Model 505 Magnetic Powder Scale 511 Grain Capacity $144.41 The RCBS Model 505 powder scale is a great addition to any reloading bench. The magnetic dampening ensure that the scale measures quickly and accurately while the black on white graduations are easy to read. The 511 grain capacity is more than sufficient for many typical reloading tasks. Capacity: 511 Grains. Material: Metal Alloy Aluminum Pan. Units: Grains. Accuracy: +/ 0.1 grains. Accessories: Aluminum pan. Features: Magnetic dampening black on white graduations three poise beam. |
|
|
RCBS 09481 Primer Pocket Swager Combo 2 $54.05 The RCBS Primer Pocket Swager2 has been redesigned to quickly remove the primer pocket crimp from a larger variety of cases than the original. Unlike reaming the Pocket Swager Kit forms a perfectly round pocket that is the correct dimensions for American boxertype primers. Combo comes with swaging heads for both large and small primer pockets. This tool also features swaging rods that are made form stronger higher tensile strength steel that more than doubles the strength when comparing to the original tool. Uses RCBS removable shellholders (sold separately) Not for use on progressive presses. Fits: Single stage and turret presses. Function: Removes primer pocket crimps from military cases. Material: Steel. Kit Contains:. 2 Swager rods: (Smallest is for 223 only). 1 Case stripper. 1 Large and 1 Small swager head (for primer pockets). 1 Swager die body with locking ring that has standard 7/8 14 threads for use with standard single stage presses. Notes:. This is a press mounted system for removing the military crimp from cases. If you are using the RCBS Big Max press you will need the optional Case Stripper for the Big Max Press. (Available only through RCBS part number 09489). If you are using the RCBS Model A2 Press you will need the optional Case Stripper Washer for the A2 Press. (Available only through RCBS part number 09488). Please note that this combo is not adaptable for use with progressive reloading tools. |
|
|
RCBS 09086 Powder Funnel 17 to 20 Caliber $23.1 The RCBS Powder Funnel for 17 to 20 caliber cases is ideal for reloaders who are reloading this small caliber rounds. The drop tube was specially designed to avoid messy powder spills around the case mouth while the measure features a nonstick antistatic surface to prevent powder from sticking and square lip to prevent rolling. Material: Plastic Funnel. Caliber Fit: 17 and 20 Caliber. Features: Specially designed drop tube to avoid messy powder spills around case mouths. Notes: Nonstick antistatic surface with square lip to prevent rolling. |
|
|
RCBS 98840 Quick Change Powder Measure $136.76 The RCBS Quick Change Powder Measure offers reloaders the ability to quickly go from light handgun to magnum rifle charges. The metering assemblies are easily changed with the pull of a pin and additional metering assemblies can be purchased and set to favorite powder charges for quick changes without resetting. The large powder hopper holds up to a pound of smokeless powder. The measure comes with both large and small metering assemblies as well as a drain attachment and 2 drop tubes. Material: Steel and plastic hopper. Capacity: 1 pound of smokeless powder. Metering Chamber: Quick Change. Attachment: To any reloading press with standard 7/8 14 threaded dies or a powder stand with the same threads (sold separately). Includes: Drain Insert Large and Small metering assemblies 22270 caliber drop tube and 3045 caliber drop tube. Notes: Not for use with black powder. |
|
|
RCBS 09010 Uniflow Powder Measure with Standard Cylinder $129 The RCBS Uniflow Powder Measure throws consistently accurate charges reload after reload. Powder pours uniformly from measuring cylinder into the brass case thereby eliminating the hazards of overloads caused by clogging when the charges are dumped . Changes easily from charge to charge without emptying the powder hopper. Numbered measuring screw is used for reference to find a given charge at a later date. The measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit. 50 grain charging capacity. Standard 7/8 14 thread. Includes stand plate drilled for easy mounting on a bench or under a reloading die lock ring. Two drop tubes for 22 caliber and up are supplied. Stand not included (Sold Separately). Material: Iron and Steel. Metering Chamber: Small. Features: Kit has an adjustable cylinder with a numbered measuring screw for reference to find a given charge at a later date measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit. Attachment: Stand Plat (drilled for bench or press mounting under a reloading die lock ring). Includes: 2 drop tubes for 22 caliber and up (Optional 1720 caliber drop tube available separately (Item 521167). Powder Charge Thrown: 5 to 110 grains of Ball Flake or Extruded powder. Note: NOT FOR USE WITH BLACK POWDER. Special Note:. There are two Micrometer Adjustment Screws available for the RCBS Uniflow Powder Measure which are NOT included. The Micrometer Adjustment Screw that you need will depend on the size of the cylinder in the powder measure. This powder measure has the large 11/16 cylinder and uses Item 654966. Small metering assembly (Sold Separately Item 917289) which will throw charges between 0.5 grains to 50 grains. |
|
|
RCBS 09340 Stuck Case Remover $36.52 Extracts stuck cases from standard sizer dies without damaging the die using a very simple two step removal process. Includes tap drill bit allen screw allen wrench and remover. Will work with any brand of die. Instructions for use:. Unscrew the expanderdecapping rod until the decapping pin is free of the primer flash hole in the stuck case. Secure the reloading die in a vice and drill the case head with the included drill bit. Drill straight through the primer pocket and the primer flash hole. Next tap the case head the included 1/4 20 tap. Place the stuck case remover body onto the case head and turn the cap screw with the allentype wrench until the case is pulled from the die. Discard the case and reassemble the die. |
|
|
RCBS 09357 Rock Chucker Supreme Single Stage Press Master Kit $561.71 The RCBS Rock Chucker Supreme press is designed to last a lifetime. It provides the same outstanding strength and versatility that RCBS presses have come to represent. Packed full of useful features that every reloader will find handy and even has the ability to be upgraded to a progressive loader with the addition of the optional Piggyback4 Conversion Kit (sold separately). Press Type: Single Stage. Frame Material: Cast Iron. Frame Design: OFrame. Handle Location: Bottom Right or Left hand. Die Size Accepted: Standard 7/8 14 threaded dies and 11/4 12 dies with bushing removed. Die Bushing Accepted: Yes. Die Bushing Brand Used: RCBS. Spent Primer Collection System: Yes. Ram Stroke: 4 . Priming Feature: Priming Arm will also accept RCBS Ram Priming Unit (sold separately). Number of Mounting Holes: 2. Mounting Hardware Included: No. Master Kit Includes:. Rock Chucker Supreme Single Stage press. 505 scale. Uniflow Powder Measure. Speer Reloading Manual. Hand priming tool with small and large primer plugs. Folding Hex Key Set with 0.050 1/16 5/64 3/32 7/64 1/8 9/64 and 5/32 keys. Universal Case Loading Block which holds 40 cases in most rifle and pistol calibers. Case Lube Kit which includes a 2 oz bottle of Case Lube2 a case lube pad 2 case neck brushes for.22 through.30 calibers and an accessory handle. Powder Funnel for.22 to.45 caliber including the Winchester Short Magnum calibers. Chamfer and deburring tool for.17 through.45 caliber. Notes: Dies and Shellholders sold separately The Hand Priming tool uses standard shellholders that are also not included. |
|
|
Soldiers Firing and Reloading their Howitzers $79.99 Soldiers Firing and Reloading their Howitzers - Premium Photographic Print |
|
|
RCBS 98927 RangeMaster 750 Electronic Powder Scale 750 Grain Capacity 110 Volt $191.93 The RCBS Range Master 750 Electronic Powder Scale is a great compact and lightweight scale that would fit great on any reloading bench. The scales small footprint makes storage and transportation easy while the large display is easy to read and adjustments can be made quickly on the easytoread touch pad. Capacity: 750 Grains. Material: Plastic housing electronic circuits. Voltage: 110 Volt. Units: Grains or Grams. Accuracy: +/ 1/10th grain. Accessories: 2 precision calibration weights aluminum powder pan. Features: Scale can operate either on AC power (adaptor included) or a 9 volt battery (not included) Auto power off function when batteries are used. |
|
|
RCBS 09332 Accessory Handle 2 $23.73 The RCBS Accessory Handle2 is a great tool to use to provide any reloader a secure no roll grip while cleaning and uniforming primer pockets with RCBS primer pocket tools. Fits: Interchangeable with any RCBS primer cleaning part also fits RCBS flash hole deburring tool replacement rod and cutter. Function: Large ergonomic handle to hold onto. Material: Plastic. Notes: Handle is designed to provide a secure grip. |
|
|
RCBS 09094 Powder Trickler $32.99 The RCBS Powder Trickler is a great tool for any reloader looking to trickle small amounts of powder into their powder pan for fine tuning to the last grain of powder to get the perfect charge weight. Material: Cast Aluminum. Features: Stable base. |
|
|
MEC 326 Reloading Equipment $24.29 Primer Cup For Steelmaster 600 Jr. 8285 600 Jr. Mark 5 600 Jr. Pre 82 700 Versamec Pre 82 Sizemaster and Versamec 8285. Manufactured to the Highest Quality Available. Satisfaction ensured. |
|
|
RCBS 09330 Primer Pocket Brush Accessory Handle $21.47 The RCBS Primer Pocket Brush Accessory Handle is a great tool to use to provide a reloader a secure no roll grip while cleaning and uniforming primer pockets with RCBS primer pocket tools. Fits: Interchangeable with any RCBS primer cleaning part also fits RCBS flash hole deburring tool replacement rod and cutter. Function: Handle to hold onto. Material: Plastic. Notes: Handle is designed to provide a secure grip. |
 |
RCBS Reloading Scales Powder Accessories Chargemaster 1500 Electronic Scale 110V AC Adaptor
List Price:  |
DescriptionAC adaptor is included. The ChargeMaster 1500 Scale was designed for the serious shooter that wants the best high tech scale on the market. |
 |
RCBS Group A Two-Die Set .308 Marlin 14901
List Price: |
DescriptionRCBS Group A Two-Die Set .308 Marlin Express |
 |
RCBS Vernier Micrometer 0-1in. - 87321
List Price: |
DescriptionRCBS Vernier Micrometer 0-1in. - 87321 |
 |
Shotshell Reloading Handbook 5th Edition
Sale Price: $63.79 |
DescriptionThis book covers all gauges from .410 to 10 gauge with more than 2,000 loads. Tested loads are built around a fresh selection of components which are currently available. It has a full range of trap, skeet, and field loads as well as specialty loads for buckshot, buffered shot charges, shotgun slugs, and a special section on round ball and conical bullet loads... |
 |
Frankford Arsenal Quick-N-Ez Impact Bullet Puller
List Price: |
DescriptionSTOP! Don't waste that loaded round! With this impact Bullet Puller you can reclaim the components from a hand-load round that went a little "funny" on you. The hammer action couldn't be easier. You get 3 different collets, sized to fit just about everything from a ... |
 |
Hornady M2 Case Tumbler 110 Volt
List Price: |
DescriptionHornady M2 Case Tumbler 110 Volt |
 |
RCBS Case Lube Pad
List Price: |
DescriptionCase Lube - PadManufacture ID: 09307The best way to lubricate cases for resizing or forming. Coat the pad with Case Lube-2 then roll the case lightly across it. Exactly the right amount of lubricant istransferred to the case... |
 |
Learn Handgun & Rifle Reloading in Under 41 Minutes
Sale Price: $28.95 |
DescriptionIf you are new to reloading let this new 2005 DVD be your guide to saving 50% or more on ammunition. You probably have a specific bullet or bullets you want to reload. For this video an RCBS Rock Chucker Master Reloading Kit was chosen as the press--because it is one of the most popular presses out there--that is, you can find the press and parts for it easily--as well as used parts, etc... |
Rcbs Reloading